Oh Jessie, you’re so fine

Installment 2 of updating Chloe to the Jessie level of Raspian: I2C and RPIO.

    • sudo apt-get install i2c-tools python-smbus pypy-smbus-cffi python-codebug-i2c-tether
    • “i2cdetect -y 1” shows 68 and 77 for Drotek MPU9250 + MS5611
    • /boot/config.txt:
    • Python development tools:
      sudo get install python-dev
    • Install and build RPIO
      git clone https://github.com/metachris/RPIO.git
      cd RPIO
      sudo python setup.py install
    • Install and build my custom GPIO – I tried using the standard RPi.GPIO again, and it’s a lot faster than it was, but not quite fast enough
      tar xvf GPIO-0.6.0.tgz
      cd GPIO
      sudo python setup install

Leave a Reply

Your email address will not be published. Required fields are marked *