Oh, by the way…

I have a hardware tweak to try first on my PiBow. With the excess of RPI’s I’ve gathered, I want to make them stably stackable with a flat top and clear rubber feet on the base, so I’m looking at using 4mm countersunk nylon bolts (PiBow uses 3mm). I’ll countersink the top plate, drill out all but the bottom plate to accommodate the 4mm bolts, and I’ll tap the bottom plate with a 4mm thread. If it works, I’ll post a pic…

P.S. and I will post my Turtle code once I’ve finished polishing my Python!

One thought on “Oh, by the way…

  1. Pingback: PiBow revisted | PiStuffing

Leave a Reply

Your email address will not be published. Required fields are marked *