£55.71 import duty* later…

and this is what UPS handed over to me in return.

Scanse Sweep 2D LiDAR tracker

Scanse Sweep 2D LiDAR tracker

First impressions are extremely good which bodes well for meeting my high requirements and expectations.  The box is sturdy, and the contents are not going to get damaged in transit; in addition to the Sweep itself, there’s

  • a custom UART / USB adaptor that’s small and slick
  • one USB A to micro-B for a PC connection – as cables like this go, this is probably the slickest looking I’ve seen – flat cable with very tidy connectors
  • one JST to bare wires to add your own connection – this is probably what I’ll be using to attach to the RPi UART ttyAMA0 as its the same wires that my Garmin LiDAR-Lite uses so I have spares
  • one cable I have no idea what it’s for – JST at one end clearly for the Sweep, but no idea what the other end’s for
  • a sticker, oddly requiring microwaving to make it sticky – I’ll be keeping this boxed!
  • a quick start guide.

I’m not in a rush to install it on Hermione; it’s too expensive to risk while I’m busy testing out the GPS, compass and yaw code – but I will put together a basic system, probably on my piPad.  That’ll let me check whether my double 2.4A battery bank is sufficient for both a B3 and the 0.5A the Sweep needs – I suspect this will be the first problem I’ll be having to fix; certainly, the raw Garmin LiDAR already runs off it only 2.4A feed due to power problems.


*I’m glad we are part of the EU and the free trade agreement means there is no import duty – oh no, wait, feck, argh – BREXIT! }:-{(>

Leave a Reply

Your email address will not be published. Required fields are marked *